furnace repair

Cape Coral is Getting Cold, but My Furnace Wont Turn On

Figuring out a furnace-related problem might feel like an intimidating task when your heat won’t work. But it doesn’t have to be like that.

There are several fast, reasonable fixes you can do on your own to avoid a furnace repair call.

If your furnace won’t turn on, won’t stay on or won’t ignite, try the troubleshooting list below before calling an HVAC professional.

If you find you need help from someone who is experienced and live in Cape Coral, Comfort Zone Inc can provide assistance to you. We repair most brands of heating systems.

If you need a new heating system, we also provide furnace replacement in Cape Coral.

While you’re chatting with us, consider a regular furnace maintenance plan from Comfort Zone Inc that could help you avoid repairs in the future. We can tell you how regularly your furnace should be checked by one of our NATE-certified experts.

Follow our easy guide below to start troubleshooting your furnace. Most of these steps don’t require mechanical skills.

Steps for Furnace Troubleshooting

Check the Thermostat

To start, make sure your thermostat is telling your furnace to start.

If you have a digital thermostat:

  • Replace the batteries if the screen is blank. If the digital screen is jumbled, the thermostat may need to be replaced.
  • Make sure the switch is set to “heat” as opposed to “off” or “cool.”
  • Ensure the program is set to the appropriate day and time and is set to “run.” If you’re having trouble overriding the program, set the temperature by using the up/down arrows and press the “hold” button. This will cause the furnace to turn on if thermostat programming is causing trouble.
  • Increase the temperature setting to 5 degrees warmer than the room temperature.
Digital Thermostat

If your furnace hasn’t started within several minutes, make sure it has power by toggling the fan switch from “auto” to “on.” If the fan doesn’t run, your furnace might not have power.

If you have a smart thermostat—like one made by Nest, Ecobee, Lux, Honeywell or Bosch—troubleshooting is very model-specific. Check the manufacturer’s website for help. If you still can’t get your Wi-Fi thermostat to work, contact us for assistance.

Lennox Smart Thermostat

Examine Breakers and Switches

Next, you will need to check if your breaker and furnace switch are on.

  • Look for your house’s main electrical panel. If you aren’t sure where it is, search for a gray metal box in your basement, garage or closet.
  • Make sure your hands and feet are dry before touching the panel or breakers.
  • Find the breaker labeled “furnace” or “heat,” and make sure it’s switched “on.” If the breaker has tripped, it will be in the middle or “off” position.
  • Using one hand, firmly switch the breaker to the “on” position. If the breaker immediately trips and pops back to “off,” don’t touch it and get in touch with a professional from Comfort Zone Inc at 239-214-0411 right away.

No matter your furnace’s age or brand, it has at least one standard wall switch located on or near it.

  • Make sure the switch is flipped up in the “on” position. If it was turned off, it could take your furnace up to five minutes to turn on. (If you don’t know where to find your furnace, look in your basement, garage or utility closet. It could also be in a crawl space or attic.)

Replace Your Furnace’s Air Filter

When it comes to furnace breakdowns, a filthy, clogged air filter is frequently the top offender.

If your filter is too dirty:

  • Your furnace won’t stay on, or it could overheat from restricted airflow.
  • Your energy bills could go up because your furnace is turning on too often.
  • Your furnace could stop working prematurely because a dirty filter causes it to work harder.
  • Your furnace can lose power if an overly dirty filter causes the breaker to trip.

Depending on what make of furnace you have, your air filter will be inside the blower compartment of your furnace, an attached filter case or wall-mounted return air grille.

Replacing a furnace filter

To replace your filter:

  • Turn off your furnace.
  • Take out the filter and angle it toward the light. If you can’t see light through it, get a new one.
  • Put in the new filter with the arrow pointing toward the furnace to avoid damage.

Flat filters should be replaced once a month, while pleated filters should last about three months. You can also buy a washable filter that will last about 10 years. If you have children or pets, you may have to change your filter sooner.

To make the process go more quickly in the future, use a permanent marker on your furnace housing or ductwork to indicate the airflow direction and filter size.

Examine the Condensate Pan

Commonly known as drain pans, condensate pans catch water your furnace removes from the air.

If water is leaking out of your furnace or its pan has standing water in it, follow these steps.

  • If your pan has a drain (look for a PVC pipe), check that it’s clear. If it needs to be drained, use a special pan-cleaning tablet you can purchase at home improvement or hardware stores.
  • If your pan contains a pump, take a look at the float switch. If the switch is stuck “up” with liquid in the pan, contact Comfort Zone Inc at 239-214-0411, because you will probably need a new pump.

Peek Inside Your Furnace

If malfunctions persist, take a look inside your furnace’s plastic window to check the status of the blower motor. Depending on the model, the light could also be attached on the outside of your furnace.

If you see anything else besides a steady, colored light or blinking green light, call Comfort Zone Inc at 239-214-0411. Your furnace may be emitting an error code that needs professional help.

Clean the Flame Sensor

If your furnace tries to start but shuts off without putting out heat, a dirty flame sensor could be at fault. When this happens, your furnace will make an attempt to turn on three times before a safety feature turns it off for about an hour.

If you feel comfortable with opening up your furnace, cleaning your flame sensor is something you can do on your own. Or, one of our HVAC experts at Comfort Zone Inc can do it for you.

If you want to clean the sensor yourself, you’ll need:

  • A 1/4” hex screwdriver or wrench
  • Piece of light grit sandpaper, steel wool or emery cloth
  • A dry, clean paper towel

Next:

  • Turn off the furnace’s power by using its wall switch or breaker. If your gas valve is not electric, you will need to shut off the gas as well.
  • Take off the furnace’s front panel and trace the wire to the flame sensor.
  • Unscrew the rod and use your sandpaper, steel wool or emery cloth to lightly rub the metal rod.
  • Wipe off the rod with a paper towel.
  • Remount the sensor.
  • Replace the furnace doors.
  • Turn the furnace’s power back on. It could run through a sequence of checks before resuming regular operation. If your furnace doesn’t ignite, the sensor may need to be replaced or something else may be wrong. If this happens, get in touch with Comfort Zone Inc at 239-214-0411 for assistance.

Relight the Pilot Light

If you are using an older furnace, the pilot light could be out. To relight it, find the instructions on a label on your furnace, or follow these steps.

  • Find the switch on the bottom of your furnace labeled “pilot,” “on” and “off.”
  • Turn the switch to the “off” position.
  • Wait at least five minutes to avoid possibly sparking a fire.
  • Turn the knob to “pilot.”
  • Push the “reset” button as you bring the flame of a long lighter to the pilot light opening.
  • Release the “reset” button once the pilot light is lit.

If you have followed the instructions twice and the pilot light still won’t light or stay lit, contact Comfort Zone Inc at 239-214-0411.

Check Your Fuel Source

Try switching on another gas appliance. If it doesn’t work, your natural gas service could be turned off, or you could be out of propane.

Comfort Zone Inc Can Help with Furnace Problems

Followed our troubleshooting guide but your furnace still won’t work?

Call us today at 239-214-0411 or use our online scheduler. We’ll come out and pinpoint the problem.

*Required fields